Rețele de Calculatoare / Computer networks

Begin preparing for a networking career with this introduction to how networks operate.  This first course in the 3-course CCNA series introduces architectures, models, protocols, and networking elements – functions needed to support the operations and priorities of Fortune 500 companies to small innovative retailers. You’ll even get the chance to build simple local area networks (LANs) yourself.  You’ll have a working knowledge of IP addressing schemes, foundational network security, and be able to perform basic configurations for routers and switches. You’ll also earn a Networking Academy badge for completing this course.  No prerequisites are required.

Luați legătură cu profesorul

(Visitat 2.108 ori, 1 visite astăzi)

PRELEGERI

1
Module 1: Networking Today
1 oră 27 min
2
Module 2: Basic Switch and End Device Configuration, part.1
1 oră 04 min
3
Module 2: Basic Switch and End Device Configuration, part.2
2 ore 26 min
4
Module 3: Protocols and Models
1 oră 46 min
5
Module 4: Physical Layer
1 oră 25 min
6
Module 5: Number Systems
58 min
7
Module 6: Data Link Layer
57 min
8
Module 7: Ethernet Frames
2 ore 34 min
9
Module 8: Network Layer
2 ore 05 min
10
Module 9: Address Resolution
1 oră 13 min
11
Module10: basic Router Configuration
1 oră 38 min
12
Module11: IPv4 Addressing
2 ore 20 min
13
Module12: IPv6 Addressing
2 ore 18 min
14
Module13: ICMP Internet Control Message Protocols
1 oră 37 min
15
Module14: Transport layer
2 ore 40 min
16
Module15 Application Layer
3 ore
17
Module16 Network Security Fundamentals
2 ore 52 min
18
Module17 Devices in a Small Network
3 ore 28 min

LABORATOARE

1
Laborator 1. Installing the Packet Tracer software
45 min
2
Laborator 2. Network Representation
53 min
3
Laborator 3. Basic switch and end device configuration
51 min
4
Laborator 4. Connect a Wired and Wireless LAN/Physical Layer Exploration
59 min
5
Laborator 5. Network Device MAC Addresses
1 oră 26 min
6
Laborator 6. Examine the ARP Table/IPv6 Neighbor Discovery
1 oră 14 min
7
Laborator 7. Configure Initial Router Settings Configure the Default Gateway
1 oră 4 min
8
Laborator 8. Configure IPv6 Addressing Implement a Subnetted IPv6 Addressing Scheme
2 ore
9
Laborator 9. IPv4 and IPv6 Addressing Use ICMP to Test and Correct Network Connectivity
1 oră 47 min
10
Laborator 10. Security Threats and Vulnerabilities Research Network Security Threats
2 ore

Fii primul care adaugă o revizuire.

Vă rugăm să vă autentificați pentru a lăsa o recenzie